Try This with Your Kids: Water Marbles

Jul 09

Try This with Your Kids: Water Marbles

How to make Water Marbles at home

Water marbles actually contain no water at all, but are made out of household products that combined appear to be marbles made out of water. Making these marbles takes a basic knowledge of chemistry and household products.

Here is the recipe:

1. Make sodium acetate by combining about one teaspoon of baking soda and a few drops of vinegar. Mix these two products by carefully swirling the mixture in the cup. Add one more teaspoon of baking soda and a few more drops of vinegar and repeat the mixing.

2. Set the sodium acetate in the freezer for ten minutes then remove from freezer.

3. Pour a half cup of calcium bicarbonate into the sodium acetate in a taller glass cup. The mixture will bubble up for a few seconds. Wait for the mixture to calm down and mix the combination by moving the glass in the same circular motion.

4. Pour a half cup of ionized salt into the newly formed mixture and mix.

5. Pour the mixture into a medium sauce pan and bring to a boil. Boil the mixture for seven minutes. Stir the mixture continually.

6. Pour the mixture into a plastic container and let it sit for 15 minutes. The mixture should turn into a gel.

7. Reach your hand in the mixture, grab some of the mixture and pull it out of the container. When the substance is in contact with the air it loses its polar ability and sticks to itself. This causes it to become small solid water spheres.

You can also buy pre-made marbles and soak them in water

EXPERIMENT

1. Fill the plastic cup 3/4 full with warm water (warmer water helps to speed up the absorbing process).
2. Measure approximately one teaspoon of tiny Jelly Marbles into the water.
3. Allow the spheres to soak for at least three hours, but don’t be afraid to pull a few out with a spoon every so often to check on their progress. Make sure to notice the changes in shape and size. As they grow, the spheres will take some very unique shapes along the way, but they’ll eventually take on the shape of a clear sphere. The Jelly Marbles should reach their maximum growth at 5-6 hours, but leaving them overnight is even better. Pour off any excess water and you’ll be left with a glass filled with clear marbles.
4. Here comes the fun part… Fill the clear glass bowl half full with water and drop the water-filled Jelly Marbles into the water one at a time. The spheres will vanish as they hit the water. When you’re finished, you’ll have what looks like a bowl of water. Reach into the water and gently remove a handful of Jelly Marbles. From this point on, it’s impossible to keep your hands out of the bowl of water!
Another way to present this demonstration is to start by showing a bowl or a glass filled with the hydrated Jelly Marbles. Slowly fill the glass with water (you won’t need much) and the Jelly Marbles seem to vanish.

You can also use the Jelly Marbles to reveal a hidden message. You’ll need a glass pie pan or a shallow glass dish of water for this trick. Write the message that you want to appear on a piece of white paper, and place the dish on top of the message. Fill the dish with a layer or two of the hydrated Jelly Marbles. You will not be able to read the message because the refracted light breaks up the letter. When you want the message to appear, pour water slowly into the dish to cover all of the spheres. As the Jelly Marbles vanish, the message appears.

How does it work?

Jelly Marbles start out as hard crystals, but they are actually made from a superabsorbent polymer that absorbs 300 times its weight in water. These hydrophilic spheres are approximately 99% water. If you look closely, you can barely see the outline of the sphere in the bowl of water. That’s because light passing through the sphere is only refracted (or bent) by the edge of the sphere. Without this refraction along the edges, the Jelly Marbles would seem to vanish altogether. In other words, the water-filled Jelly Marbles become invisible due to an identical index of refraction with the water in the bowl. The secret is to keep the Jelly Marbles clean and free of oil from your skin. The more you touch the spheres, the less invisible they become because dirt and oil on your fingers are transferred to the surface of the sphere, which also reflects the light to reveal the sphere.

In the hidden message demonstration, the message looks scrambled because the rays of light are scattered by the water-filled Jelly Marbles. It’s like trying to look through broken glass. When water is added to the dish, the light rays pass right through the water and the spheres without being scattered due to the Jelly Marbles’ identical index of refraction with the water. So, it looks like you’re looking through a plain dish of water.

Source 1: How to Make Water Marbles

Source 2: Vanishing Jelly Marbles Kit

Related Posts Plugin for WordPress, Blogger...